UAZ car
In the article, we will consider disassembling the generator and replacing the elements of the generator
We prepare the car for the task and remove the generator, as described in the previous article
Proper selection and installation of the piston group plays an important role in engine operation
All parts of the connecting rod and piston group are divided into categories and are selected individually for each other
Remove the starter as described in the previous article
We remove the cardan shafts of the car for replacement or for repair, as well as when removing the transfer case
We install the car on a viewing ditch or lift
We remove the steering knuckle and axle shaft for repair, as well as for replacement
We remove the gearbox for repair, as well as when replacing clutch discs and when removing the engine
Serving the fuel pump while replacing fuel filter elements
Remove and disassemble the pump for repair
The thermostat is replaced in case of overheating or insufficient warming up of the engine coolant, when the defect clearly indicates incorrect operation of the thermostat
The windshield wiper consists of a gearmotor with rods, levers and brushes
The wiper mechanism is located under the instrument panel
We check and adjust the valve clearances when repairing the cylinder head, as well as when a characteristic engine knock appears in the upper part of the cylinder head
We remove the oil cooler for replacement or repair
Preparing the car for the task
