UAZ car
We prepare the car and drain the brake fluid from the system
Usually, the manifold is removed to replace the gaskets, as well as when repairing the cylinder head and engine
The fluid and filter in the power steering system must be replaced every 100,000 km or after two years of vehicle operation
We prepare the car for the task, install it on a horizontal platform and remove the wheel from the side of the work being done
We prepare the car and remove the rear wheel from the side of the task being performed
Remove the brake pads from the brake shield and leave them hanging on the support pins
We remove the cylinder head to replace the gasket between the head and the cylinder block, as well as for repair
The system consists of a recirculation valve with a diaphragm, a thermal vacuum switch and two hoses
We prepare the car for the task and turn off the battery mass
Remove the air filter housing and air filter adapter as described in previous articles
Two types of front axles are installed on cars - with a single final drive or with additional wheel reduction gears
We remove the viscous fan clutch and coolant pump for replacement or repair
UMP-4178, -4179, -4218 or ZMZ-4021, -4104 engines are installed on the car.
They all have basically the same design