UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

Proper selection and installation of the piston group plays an important role in engine operation

All parts of the connecting rod and piston group are divided into categories and are selected individually for each other

  1. Disassembly and assembly of the ZMZ UAZ-3151, -31512, -31514, -31519 engine
  2. UAZ-3151, -31512, -31514, -31519 carburetor design Feature
  3. Removal of the rear door elements of the UAZ-3151, -31512, -31514, -31519

Articles

The main gear pinion is made integral with the shaft (tailpiece) and is installed in the gearbox neck on two tapered bearings. The outer bearing rings are pressed into the neck seats, and the inner...

The exhaust gas treatment system is designed to reduce emissions of nitrogen oxides from the engine.

General structure of the fuel vapour recovery system The fuel vapour recovery system prevents the escape into the atmosphere, from the fuel system, of fuel vapours that adversely affect the ecology...

The system consists of a recirculation valve with a diaphragm, a thermal vacuum switch and two hoses

Gear Selection On models with automatic transmission, there is no need to constantly shift gears.

We install the cylinder head after repair, inspection and fault detection. Before installing the cylinder head, set the cylinder pistons to the middle of the stroke.