UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

Replacement of fuel system filters according to the technology is provided after 16,000 km of run, and air filter after 8,000 km

But, of course, given the operating conditions, it is necessary to perform filter replacement operations much earlier

  1. How to disassemble and remove the front door of the UAZ-3151, -31512, -31514, -31519 car
  2. How to disassemble the carburetor K-151 UAZ-3151, -31512, -31514, -31519
  3. Repair of lamps and indicators of the UAZ-3151, -31512, -31514, -31519 car

Articles

Remove the fuel rail and injectors for inspection, cleaning and replacement You will need socket heads for 10, 12, and screwdrivers

This article will cover the preparation of the cylinder block, crankshaft and piston for engine assembly

Removing the heater core Disconnect the leads from the battery terminals, starting with the negative terminal.

Before assembly, check the condition of the gearbox parts. Cracks of any shape and length are not allowed on crankcase parts

When repairing an engine and its systems, it may be necessary to set the TDC (top dead center) of the piston of the first cylinder in the compression stroke

Wheel drives with constant velocity joints (CV joints) are used to transmit torque from the main gear to the drive wheels at different wheel angles and suspension travels.