UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

We prepare the car for the task and turn off the battery mass

Remove the air filter housing and air filter adapter as described in previous articles

  1. How to adjust the valve clearances of the UAZ-3151, -31512, -31514, -31519 car engine
  2. How to replace the thermostat and coolant sensor UAZ-3151, -31512, -31514, -31519
  3. How to disassemble the UMZ UAZ-3151, -31512, -31514, -31519 engine

Articles

The power supply system consists of two fuel tanks, fuel lines, a switching valve, a fuel pump, a sediment filter, a fine fuel filter, a carburetor with a throttle and air damper drive, an air filter

The car uses a speed control system to help the driver not exceed the set speed of the car

Drive shafts transmit torque from the engine, gearbox, and differential to the front wheels.

We remove the oil separator to clean it from deposits, as well as when dismantling the cylinder head cover

Removing the camshaft was discussed in the article - " How to disassemble the engine "

In this article, we will look at how to remove the wiper elements and replace them