UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

The frame consists of two box-shaped spars of variable section, interconnected by five crossbars

  1. How to remove the clutch discs of a UAZ-3151, -31512, -31514, -31519 car
  2. Maintenance and repair of steering rods UAZ-3151, -31512, -31514, -31519
  3. How to replace and adjust the rear wheel pads UAZ-3151, -31512, -31514, -31519

Articles

We remove the levers if you need to replace the silent blocks or if the levers themselves are deformed.

In the previous article, we covered the removal and installation of the engine cylinder head. This article will describe how to check and repair the cylinder head of an ISF3.8 engine.

The fog lamps can be replaced after first removing the bumper. However, they can also be replaced without removing the bumper.

The immobilizer coil is put on a piece of pipe (welded to the steering column pipe) in which the ignition switch is installed.

If oil leakage through the oil pan gasket cannot be stopped by tightening the mounting bolts, the gasket is severely deformed and must be replaced.

If you detect signs of oil leaking through the crankshaft seals, first check to see if the crankcase ventilation system is clogged or if any hoses are pinched. Repair if necessary.