The need to adjust the clearances in the valve drive is indicated by a distinct loud knock, audible when the engine is idling from the driver's seat with the hood closed
The fuel system uses electro-hydraulic injectors, the operation of which is controlled by an electronic control module
A double-row roller bearing is installed in the hub, which does not require adjustment and lubrication during operation.
When the hub is pressed out of the bearing, it is destroyed. Therefore, we remove it only for replacement.
- Installation of TDC of the first cylinder Cummins ISF2.8
- Removing and installing gearbox GAZelle Next
- Replacing the ignition lock GAZelle Next
- Removing and installing flywheel of the Cummins ISF2.8 engine
- Removal and installation of the generator 5272666 GAZelle Next
- Checking and changing the oil in the gearbox and the rear axle GAZelle Next
- Cummins ISF2.8 engine design