UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

Disassembling the transfer case to replace worn parts

We install the car on a viewing ditch or lift

  1. How to replace the viscous fan coupling and coolant pump UAZ-3151, -31512, -31514, -31519
  2. Disassembly of the pivot joint and removal of the front axle of the UAZ-3151, -31512, -31514, -31519
  3. How to remove and install the car wiper UAZ-3151, -31512, -31514, -31519

Articles

Drain the transmission fluid Place the vehicle on a two-post lift

We remove and disassemble the shock strut for repair or replacement of shock strut elements

All operations are conditionally shown on the removed engine. Because the engine can be installed on different types of cars.

Disassembly of a partially synchronized gearbox Disassemble in the following order: Remove the side cover with the switch mechanism.

Renault Logan vehicles are equipped with transversely mounted four-cylinder, four-stroke, gasoline-fueled, 8-valve, 1.6-liter K7M (SOHC) and 16-valve K4M (DONC) engines.

In the article, we will consider how to replace the filter elements and remove the car air filter housing