UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

We remove the elements of the oil system for replacement, as well as for repair

We prepare the car for the task and install it on a viewing ditch or lift

  1. How to replace the brake cylinder and rear wheel hose UAZ-3151, -31512, -31514, -31519
  2. Removing the rocker arm axis and replacing the oil-reflecting caps of the UAZ-3151, -31512, -31514, -31519 engine
  3. Adjustment of the spring-lever clutch of the car UAZ-3151, -31512, -31514, -31519

Articles

Displaying fault codes To display fault codes, turn off the engine, turn the ignition switch to the “I” position and turn on the diagnostic mode with the diagnostic test switch.

The car uses a speed control system to help the driver not exceed the set speed of the car

We remove the hood for replacement or for repair, and also remove the hood when removing the engine and power plant components

After disassembled the engine , you need to thoroughly wash all the parts with gasoline and remove carbon deposits. Before assembling the engine, it is necessary to inspect the cylinder block,...

Preparing the car for the task Removal Unscrew the two screws securing the front panel

Place the vehicle on a two-post lift. Remove the engine oil sump guard and right front wheel.