UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

The electrical equipment of the car is made according to a single-wire circuit: the negative terminals of sources and consumers of electricity are connected to the body and other units of the car, which act as a second wire

  1. How to replace the drive belt for UAZ-3151, -31512, -31514, -31519 units
  2. UAZ-3151, -31512, -31514, -31519 carburetor design Feature
  3. Replacement of ignition system elements UAZ-3151, -31512, -31514, -31519

Articles

We remove the steering wheel for replacement, as well as when removing the steering column and steering column switches Set the steering wheel to the position corresponding to the rectilinear...

The car has natural and forced ventilation During natural ventilation, air enters the cab through the swing doors

Since 2015, the VAZ-2123 car has been equipped with an electronic engine control system with a controller ME17.9.71 2123-1411020-50 to comply with EURO-5 toxicity standards.

A decorative casing on the engine is installed to reduce noise levels and to improve the appearance of the engine compartment

The camshafts of the F4R and K4M engines are located in the upper part of the cylinder head. One shaft opens the inlet valves and the other the exhaust valves.

The factory recommends replacing the filter element after 45,000 km, but this depends on the operating conditions