We check the belt of auxiliary units at each technical inspection, as well as in the event of a malfunction associated with possible damage or low belt tension.

  1. Removal and installation of the timing belt of the K4M engine
  2. Nissan Almera Body Front Wiring Diagram
  3. How to remove the Renault Duster dashboard
  4. Design features of the K4M engine
  5. Cummins ISF2.8 Timing Chain Replacement

Remove the fuel rail and injectors for inspection and replacement.

Remove the fuel module for replacement or repair Tools will be required: screwdrivers, a container for draining fuel from the fuel pump module, a 14 wrench

The air conditioner compressor is a very complex, high-tech device. Some components of the pump part of the compressor are made to order.

UAZ vehicles are equipped with two types of rear axles - with a single final drive or with additional wheel reduction gears

The dashboard of a collapsible car consists of a decorative panel and a frame

We remove the instrument cluster from the car for replacement, as well as when removing the instrument panel.

This article will cover the preparation of the cylinder block, crankshaft and piston for engine assembly

In most cases, repair of the cylinder head consists of lapping or replacing valves and their guide bushings, replacing or grinding valve seats

The engine oil pump is gear mounted in the timing chain cover