We remove the gearbox when replacing the clutch discs, when dismantling the engine, and repairing the gearbox itself

We remove the springs to replace the spring leaves or when replacing the spring assembly.

To perform the work, you will need the following tools: Jack, 22, 24 keys, 24 socket head, hammer, punch, drift.

We remove the gearbox as described in the article - Removing and installing the gearbox gear GAZelle Next

In the gearbox and in the rear axle, you need to check the oil level every 20,000 km of the car's run

The car accelerates poorly

There are many reasons for the deterioration of dynamics, the main ones can be defined as follows.

A double-row roller bearing is installed in the hub, which does not require adjustment and lubrication during operation.

When the hub is pressed out of the bearing, it is destroyed. Therefore, we remove it only for replacement.