Solaris

We remove the main brake cylinder for repair, as well as for replacing the vacuum booster. As practice shows, repairing the brake master cylinder does not give the desired result, so it is better to replace it

  1. Repair of the brakes of the rear wheels of the car Hyundai Solaris
  2. Removal and installation of an oil crankcase of the Hyundai Solaris engine
  3. Repair and adjustment of the parking brake Hyundai Solaris

Articles

Removing and disassembling the cylinder block By default, the cylinder head is already removed

We typically remove the flywheel for replacement if the toothed rim is damaged, when replacing the rear crankshaft oil seal, or during engine repairs.

Fuses are designed to interrupt the circuit when the current exceeds a certain value, protecting components and wiring that could be damaged by excessive current.

We remove the engine intake pipe to replace the gasket and when repairing the cylinder head

If the valve does not fit tightly on the seat, then gaps are formed in some areas of the valve and seat. In this case, gases under pressure and at high speed pass into the formed gaps, so in this...

We remove the front wheel drives to gain access to other units, as well as for repair and replacement Removing the left drive We prepare the car and install it on a lift or an inspection ditch