In the article, we will consider possible malfunctions that may occur during the operation of the car.

  1. Assembling the H4M engine
  2. Running and stopping the engine of the car Renault Arkana
  3. Disassembly of the cylinder block of the K4M engine
  4. Design features of the ZMZ-402 engine
  5. How to check and adjust Renault Sandero engine valves

The immobilizer is an electronic unit that does not allow starting the engine without using the ignition key or with the help of an outside key.

Synchronization of the impulse wheels of the crankshaft and the drive gear shaft of the injection pump The need to install (reinstall) the impulse wheels of the crankshaft and the shaft of the...

The fuel rail collects fuel and distributes it between the fuel lines of individual injectors

We remove the basket and the clutch disc for replacement if they fail, as well as when replacing the flywheel and the rear crankshaft oil seal

Before disassembling, clean the outer surface of the gearbox with a cleaner or solvent.

The Renault Duster starter is a four-pole, four-brush DC motor with permanent magnet excitation, combined with an electromagnetic two-winding traction relay

Replace the release bearing if there is increased noise when pressing the clutch pedal When replacing the clutch release bearing, it is necessary to check the condition of the petals of the drive...

We replace the transmission control cables if they are worn out

In the article, we will consider possible malfunctions that may occur during the operation of the car.