Solaris

Replace the rear wheel hub when the hub bearing is worn.

We replace the hub assembly with the bearing, since it is very difficult to replace the hub bearing and there is practically no point

  1. Body features and control dimensions of the Hyundai Solaris body
  2. Removing the grille of the air intake box and fender of the Hyundai Solaris car
  3. How to replace light bulbs in Hyundai Solaris lighting fixtures

Articles

We remove the gearbox as described in the article - Removing and installing the gearbox gear GAZelle Next

Renault Logan vehicles are equipped with transversely mounted four-cylinder, four-stroke, gasoline-fueled, 8-valve, 1.6-liter K7M (SOHC) and 16-valve K4M (DONC) engines.

The front suspension is independent, MacPherson type linkage spring, with telescopic shock absorber struts, coiled coil springs, wishbones, torsion-type anti-roll bar.

We prepare the vehicle for the work. We prepare a TORX T20 key and a screwdriver.

Replacing the front brake pads Prepare the car for the task. Place the car on a flat horizontal surface. Brake pads should be replaced when the linings are worn less than two mm.

We install the car on a viewing ditch or lift Disconnect the negative battery terminal