Running in the car

When running in a new car, the following rules must be observed:

During the first 1000 km, you must not exceed a speed of 130 km/h in top gear

  1. Disassembly of the cylinder block of the K4M engine
  2. Design features of the ZMZ-402 engine
  3. How to check and adjust Renault Sandero engine valves
  4. How to replace fuses in a Renault Duster car
  5. Checking and replacing the engine coolant Renault Duster

Preparing the car for the task Removal Unscrew the two screws securing the front panel

For Mazda 6 cars, in the basic configuration (depending on the type of engine used) a manual gearbox mod. G35M-R or G66M-R

The lever and ball joint are replaceable in case of wear You will need keys for 17, 19, 21

We replace the vacuum brake booster when it fails. If the vacuum booster is faulty, the force on the brake pedal increases significantly

We remove the viscous fan clutch and coolant pump for replacement or repair

We remove the oil sump when overhauling the engine and for access to the crankshaft and parts of the cylinder-piston group

Any deviations from the norm on the car (noise, knocking, loss of control, etc.) need to determine the source of the malfunction and the method of elimination

Remove the fuel module for replacement or repair Tools will be required: screwdrivers, a container for draining fuel from the fuel pump module, a 14 wrench

We replace the shock absorber and spring of the rear suspension in case of deformation or breakage