To overhaul the engine, we disassemble the cylinder block.

  1. Design features of the ZMZ-402 engine
  2. How to check and adjust Renault Sandero engine valves
  3. How to replace fuses in a Renault Duster car
  4. Checking and replacing the engine coolant Renault Duster
  5. Fuses and relay Renault Sandero
  6. Installing the cylinder head of the K4M engine
  7. Removing the ECU and sensors COURT car Renault Duster
  8. Checking and replacing the accessory drive belt Renault Sandero
  9. Removal and installation of the timing belt of the K4M engine
  10. Nissan Almera Body Front Wiring Diagram
  11. How to remove the Renault Duster dashboard
  12. Design features of the K4M engine
  13. Cummins ISF2.8 Timing Chain Replacement
  14. Assembly of the engine block G4KD and G4KE Kia Magentis
  15. Replacing the accessory belt Nissan Almera

Remove heater elements for inspection or replacement

Install the cylinder block on the engine assembly stand. Assemble and prepare the piston group Prepare the crankshaft for assembly

At the factory, Hyundai Solaris vehicles are equipped with a maintenance-free battery made using calcium, with a nominal voltage of 12 V, with a capacity of 60 Ah.

The car can be equipped with a starter 42.3708 or 4211.3708-01 or 62.3708 Starters have almost the same design

Reducer with tubular adjustable valve Renault Megane 2 Due to its design, the tubular adjustable valve is a non-replaceable element (Fig. 1)

Disassembling the gearbox shafts to replace parts

In the article, we will consider the removal and installation of car lights and lamps

Replacing the engine oil pressure drop sensor The emergency pressure drop sensor is installed in the cylinder block in the left front of the engine (above the oil filter)

If there is a loss of power, increased fuel consumption or increased oil consumption, it is necessary to check the compression in the engine cylinders