We dismantle the subframe if you need to remove the gearbox or the entire power unit, as well as when replacing and repairing the subframe.
Removing the door trim To remove the front door trim, the following tools are required: TORX T20 and T40 keys, a set of screwdrivers.
The immobilizer coil is mounted on a section of pipe (welded to the steering column tube) that houses the ignition switch.
We remove the cylinder head cover for repair and adjustment work, as well as when replacing seals.
The causes of the main brake cylinder malfunction are wear or loss of elasticity of the cuffs, wear of the working surfaces of the cylinder and pistons, swelling of the cuffs (due to mineral oils...
This article covers the replacement of engine management sensors.