engines
The engine of a car is the engine that drives a car.
This section describes the design, maintenance, and repair of engines.
Some engines and their features are described directly in the sections that describe this vehicle.
The timing chain tensioner is located on the right side of the engine above the coolant pump.
Oil is supplied to the hydraulic tensioner through a seamless steel tube with a diameter of 6 mm with tips.
The main dimensions of the crankshaft are given in Figure 1.
Crankshaft - cast, cast iron, five-bearing.
It is possible to regrind the crankshaft journals during repairs with a diameter reduction of 0.25; 0.5; 0.75; and 1 mm.
We remove the cylinder head to replace the gasket under the head or to repair the cylinder head itself.
We discussed the removal of the cylinder head in article. In this article, we will look at the disassembly and assembly of the cylinder head.
Disassembling the engine for overhaul.
Usually, an overhaul of the engine is required with a large motor resource, with a decrease in oil pressure and a decrease in compression in the engine cylinders
We examined the engine disassembly in the article - Engine disassembly.
In this article, we will consider the defect detection of parts and the preparation of the main parts for assembly.
