Remove the intake silencer.
Remove the air filter housing.
Remove the throttle body
Two compression rings and one oil scraper are installed on the piston.
Compression rings are designed to prevent gases from escaping into the crankcase when they are compressed and expanded
The mass air flow sensor on the VAZ-2123 engine is located between the air filter housing and the air supply hose to the throttle assembly
Adjustment of the clearances between the rocker arms and the valves is carried out on a cold engine, with the cylinder head fastening nuts and the nuts for fastening the rocker arm axle struts tightened to the required torque.
- How to remove the receiver and intake manifold of the VAZ-2112 engine
- Diesel power system D-245.7E3 / D-245.9E3
- Replacing the timing belt on the VAZ-2112 engine
- Disassembly of the cylinder block of the K4M engine
- Removing elements of the Cummins ISF3.8 air intake system
- Feature of the crank mechanism of the KAMAZ-740.50-360, KAMAZ-740.51-320 engines
- Dismantling and troubleshooting of the crankshaft ZMZ-402
- Features of the ECM with an electronic gas pedal VAZ-2123
- Diesel engine cooling system D-245.7E3 / D-245.9E3
- Disassembly and assembly of the cylinder head ZMZ-402
- How to replace the hydraulic valve lifters of the VAZ-2112 engine
- Fault detection of the cylinder block of the K4M engine
- Cummins ISF3.8 Engine Spare Parts Catalog
- Inspection and repair of the crankshaft of the VAZ-2123 engine
- The design of fuel supply to diesel KAMAZ-740.50-360, KAMAZ-740.51-320