Solaris
Brake repair consists of disassembly, evaluation and replacement of parts
Brake repair consists of disassembly, evaluation and replacement of parts
Adjustment of the regulator is necessary after replacing the rear springs or the rear axle, as well as during the operation of the car
The pressure regulator is attached to the frame. It adjusts the brake fluid pressure in the rear brake circuit, depending on the vehicle load, which increases directional stability during braking.
Removing the head from the engine was discussed in the article - " Dismantling the cylinder head » Disassembling the cylinder head in the article - " Disassembling the cylinder head " In this...
Drain the transmission fluid Place the vehicle on a two-post lift
We change the anthers of the drive hinges in case of damage or when replacing the hinge.
Hold the multifunction switch lever in the extreme position (in the forced first gear position) using a plastic clamp and a bolt screwed into the gearbox housing (Fig. 1)
Select your language
