We install the cylinder block on the stand for disassembly and assembly of units

  1. Running and stopping the engine of the car Renault Arkana
  2. Disassembly of the cylinder block of the K4M engine
  3. Design features of the ZMZ-402 engine
  4. How to check and adjust Renault Sandero engine valves
  5. How to replace fuses in a Renault Duster car

Remove the air intake grille to access the wiper mechanism and when replacing the glass and front fender, as well as for replacement

When valve stem seals are worn, there is increased oil consumption and oily spark plug electrodes

The mass air flow sensor on the VAZ-2123 engine is located between the air filter housing and the air supply hose to the throttle assembly

We remove the gearbox for replacement, as well as for repair Malfunctions in which you need to remove the manual transmission:

Engage the car in first gear (move the automatic transmission selector to the "P" position) and chock the front wheels. Prepare the car for work.

In the article, we will look at how to bleed the refrigerant from the system, replace the tube seal rings and parts, and replace the cabin air filter element

The crankshaft (Figure 1) is made of high-quality steel and has five main and four connecting rod journals, connected by cheeks and mated with transition fillets

During operation, tar deposits from crankcase gases accumulate in the crankcase ventilation system

The clutch drive is adjustable if a spring-lever clutch is installed on the car