Adjustment of thermal gaps in the valve drive is required for engines K7J and K7M.

For the K4M engine, valve clearance adjustment is not required, this engine is equipped with hydraulic valve clearance compensators

  1. How to replace fuses in a Renault Duster car
  2. Checking and replacing the engine coolant Renault Duster
  3. Fuses and relay Renault Sandero
  4. Installing the cylinder head of the K4M engine
  5. Removing the ECU and sensors COURT car Renault Duster

A liquid-type heater is installed on the car

We remove the suspension assembly for replacement or major repairs To complete the task, you will need the following tools: 13, 16, 19, 22, 24 wrenches, 17 socket, jack, ball joint puller, spring...

If there is a loss of power, increased fuel consumption or increased oil consumption, it is necessary to check the compression in the engine cylinders

Before disassembling, we wash and clean the gearbox. Drain the oil from the gearbox.

The hinges of equal angular velocities are replaced in case of defects described in the previous article It does not make sense to replace individual parts of the hinges, in extreme cases, only the...

We remove the main brake cylinder for repair, as well as to replace the vacuum booster

The front suspension is independent, MacPherson type, with triangular wishbones and anti-roll bar.

Cylinder head gaskets are replaced when coolant and oil leaks appear at the junction of the cylinder head with the cylinder block

Remove the hood and air intake grille for replacement or repair