Duster
Checking the technical condition of the belt should be carried out at each maintenance of the car
We remove the car engine by lowering it down together with the gearbox from the engine compartment
The fuel vapor recovery system prevents fuel vapors from escaping into the atmosphere, which adversely affect the environment
On a vehicle with a 1.6L engine, the fuel filter is installed in the fuel module
The pressure in the lubrication system is generated by a gear oil pump installed in the engine oil sump at the front of the cylinder block and driven by a chain drive from the crankshaft
We remove the cables of the control mechanism and the mechanism itself in case of damage to the cables or the control mechanism
Usually the heater is removed to replace the evaporator or to repair the heater.
Before completing the task, we discharge the air conditioning system, for this:
We remove the receiver to replace gaskets, as well as when dismantling engine components, in which it is necessary to dismantle the receiver
The driveline transmits torque from the transfer case to the rear gearbox.
We remove the gearbox to replace the clutch, flywheel, crankshaft rear oil seal. In addition, we remove the box if the following malfunctions occur:
Remove the fuel tank for flushing or replacement
Preparing the car for the task. It is desirable that the tank is empty.
