GAZELLE NEXT
The disassembly of the gearbox was discussed in the article - How to disassemble the gearbox of the Gazelle Next car
In this article, we will look at how to properly assemble and adjust the rear axle gearbox of a Gazelle Next car
We remove the gearbox when replacing the clutch discs, when dismantling the engine, and repairing the gearbox itself
The cars in the variant version are equipped with the anti-lock braking system (ABS) of the 8.1 series from Bosch
We remove the exhaust manifold when repairing the cylinder head or when replacing the manifold gasket.
A double-row roller bearing is installed in the hub, which does not require adjustment and lubrication during operation.
When the hub is pressed out of the bearing, it is destroyed. Therefore, we remove it only for replacement.
The vacuum required to operate the brake booster is generated by a vacuum pump driven from the front end of the engine camshaft
The car does not accelerate well
There are many reasons for the deterioration of dynamics, the main ones can be defined as follows.
The high pressure fuel pump (TNVd) is driven by gears from the rear end of the crankshaft.
The pump housing also has a mechanical booster pump that draws fuel from the tank.
We remove the springs to replace the spring sheets or when replacing the spring assembly.
To complete the work, you will need tools: a jack, keys for 22, 24, socket for 24, a hammer, a barb, a drift.
Oil seals are replaced in case of grease leaks
It should be borne in mind that if the gas recirculation system is clogged, then oil leakage from under the oil seals may occur due to increased gas pressure in the engine crankcase
Lapping of valves is required when repairing the engine cylinder head