In this article, we will look at how to remove the axle shaft, replace and adjust the bearings of the rear wheel hubs.
We remove the steering wheel when removing the steering column switches, ignition lock, instrument panel and when removing the steering column.
It is recommended to change the brake fluid with an assistant, having previously installed the car on a viewing ditch or overpass
Replacing the clutch discs is necessary when the effort on the pedals decreases when the clutch is disengaged (and, accordingly, the working stroke increases), which indicates a large wear of the surface of the drive disc or "settlement" of the spring
The rear suspension of the car is dependent, on two longitudinal semi-elliptical two-leaf springs with additional springs (springs), with hydraulic telescopic shock absorbers
We remove the switches and the sound signal as a result of their malfunction
The power plant of the car is attached with three supports
Two rubber mounts are located on the sides of the engine and one is under the gearbox
The ISF2.8 engine uses a cartridge type fuel filter
The dashboard consists of a metal power frame, a plastic frame and removable parts
- Replacing the brake drum and rear wheel pads Gazelle Next
- Replacing the ball joints of the front suspension GAZelle Next
- Removal and installation of a turbocharger Cummins ISF2.8 Gazelle Next
- Removal and installation of the electronic control unit GAZelle Next
- Features of the heating system GAZelle Next