engines

The engine of a car is the engine that drives a car.

This section describes the design, maintenance, and repair of engines.

Some engines and their features are described directly in the sections that describe this vehicle.

Assembling the VAZ-2112 engine: crankshaft, cylinder block, piston-rod assembly, flywheel

Engine dismantling was covered in the article «Engine dismantling».

Fault inspection of the engine parts was covered in the article «Engine inspection».

In this article we consider the main points of assembling the VAZ-2112 engine: assembling the crankshaft and cylinder block, fitting the rear oil seal and the oil pump, assembling the piston-rod assembly and fitting the flywheel.

  1. Assembling the VAZ-2112 engine - continued
  2. Replacing the timing belt on the VAZ-2112 engine
  3. How to replace the hydraulic valve lifters of the VAZ-2112 engine
  4. How to remove the receiver and intake manifold of the VAZ-2112 engine
  5. How to remove the fuel rail and the VAZ-2112 engine regulator
  6. Replacing the alternator belt of the car Lada Largus K4M engine
  7. Removal and installation of the timing belt of the K4M engine
  8. Removing and installing the cylinder head cover of the K4M engine
  9. Removal and installation of the intake manifold of the K4M engine
  10. Cleaning the crankcase ventilation system of the K4M engine
  11. Removing the cylinder head of the K4M engine
  12. Installing the cylinder head of the K4M engine
  13. The operation of the phase regulator of the K4M engine
  14. Disassembly of the cylinder head K4M
  15. Repair of the cylinder head of the K4M engine
  16. Replacing the camshaft seals of the K4M engine
  17. Disassembly of the cylinder block of the K4M engine
  18. Fault detection of the cylinder block of the K4M engine
  19. Dismantling, checking the connecting rod and piston group of the K4M engine