Piston pins are installed with an interference fit in the upper heads of the connecting rods and rotate freely in the piston bosses, so heat the upper head of the connecting rod to a temperature of 250˚ C
- Replacing the cylinder head gaskets of the 740 Kamaz diesel engine
- Cleaning of the crankcase ventilation system of the VAZ-2123 engine
- Setting the fuel injection advance angle of the D-245.7E3 / D-245.9E3 diesel bus PAZ 32053-07
- Repair and replacement of the oil pump ZMZ-402
- Disassembly of the VAZ-2112 engine
- Schemes COURT FOTON AUMARK ISF3.8 CM2220
- Replacement and inspection of the camshaft sensor VAZ-2123
- Lubrication system of the engine D-245.7E3 / D-245.9E3
- Removal and installation of the intake manifold of the K4M engine
- Installation of pistons and rings Diesel 740 KAMAZ
- Replacement of DMRV VAZ-2123 with electronically controlled throttle valve for EURO-5
- Adjustment of clearances in the valve drive ZMZ-402
- How to remove the receiver and intake manifold of the VAZ-2112 engine
- Diesel power system D-245.7E3 / D-245.9E3
- Replacing the timing belt on the VAZ-2112 engine