UAZ car
The engine oil must be changed in accordance with the maintenance schedule for each specific vehicle.
Usually, the mileage of a car before the next oil change is 10-15 thousand km
Let's consider the removal of the connecting rod and piston group without removing the engine from the car
Preparing the car for the task
Remove the front wheel from the side of the work being done
We reduce the brake pads
Serving the fuel pump while replacing fuel filter elements
Remove and disassemble the pump for repair
We remove the oil cooler for replacement or repair
Preparing the car for the task
In the article, we will consider the replacement of car switches and switches
In the article, we will consider replacing the steering rods and lubricating the steering rod joints, as well as adjusting the toe of the front wheels
We prepare the car and drain the brake fluid, as indicated in previous articles
Remove the brake pads
Remove the brake hose, for this
The system consists of an electronic control unit, a microswitch, a forced idle economizer valve, a solenoid valve, connecting hoses and wires (Fig. 1)
We adjust the carburetor dampers after repair work related to the removal of damper actuators
We remove the cardan shafts of the car for replacement or for repair, as well as when removing the transfer case
We install the car on a viewing ditch or lift