UAZ car
Cuffs of the front axle elements are replaced when worn and during repairs
The fluid and filter in the power steering system must be replaced every 100,000 km or after two years of vehicle operation
We replace the supports if they are worn out
We prepare the car and install it on a viewing ditch or lift
We remove the engine from the car, as described in the previous article
Remove the oil filter and the right arm of the power plant support
The cars are equipped with a dependent spring rear suspension.
The rigid rear axle is suspended from the frame spars on two multi-leaf or small-leaf springs
The thermostat is replaced in case of overheating or insufficient warming up of the engine coolant, when the defect clearly indicates incorrect operation of the thermostat
We install the car on a viewing ditch or lift
Disconnect the negative battery terminal
In the article, we will look at how to remove the fuel tank and fuel tank elements
We prepare the car for the task, install it on a horizontal platform and remove the wheel from the side of the work being done
The parts of the connecting rod and piston group are divided into categories and are selected individually for each other
In the article, we will consider the adjustment and repair work of the mechanism and drive of the car handbrake
The parking brake is adjustable if the lever travel has become more than half of its maximum travel (7-8 clicks), or the car is not held on a slope
