UAZ car

These two-axle, all-terrain vehicles, with front and rear drive axles (4x4 wheel arrangement), are designed to transport people and cargo on all types of roads and off-road. Vehicles equipped with a towing hitch and shock-absorbing device can tow a single-axle trailer with a gross weight of up to 850 kg. Vehicles with a rigid towing device may only be used as a towing vehicle for short periods.

In the article, we will consider the replacement of shock absorbers and front suspension springs

We prepare the car and install it on a lift or a viewing ditch

  1. Removing the front removable body parts of the car UAZ-3151, -31512, -31514, -31519
  2. How to replace the brake cylinder and rear wheel hose UAZ-3151, -31512, -31514, -31519
  3. How to disassemble the carburetor K-151 UAZ-3151, -31512, -31514, -31519

Articles

The cylinder head cover is sealed with a rubber gasket. The fuel injector mounting bolts are also sealed with rubber rings.

The electronic control unit (ECU) for the electric power steering (EPS) system is installed in the engine compartment under the brake master cylinder.

Depending on the engine model, various modifications of the K-151 carburetor are used, differing in the flow sections of the jets and minor design changes

Tools: TORX T40 key, 18 mm socket, screwdriver.

We install the engine on a stand for disassembly and assembly of units Unscrew the oil drain plug and drain the oil from the crankcase

To remove the air inlet hose from the air-to-air cooler (F4R engine), disconnect the hose using the tool (Car1363)